Optical Fiber Fusion Splicer - Light Weight
1 x ¥443,702.04 = ¥443,702.0410Gb/s SFP Transceiver - DWDM, 40km Reach
1 x ¥116,880.50 = ¥116,880.50Direct Buried Optical Fiber Cable - 24 to 312 Fibers, G652.D
1 x ¥0.00 = ¥0.00Optical Power Meter - 650nm
1 x ¥60,659.50 = ¥60,659.50EPON OLT Optical Transceiver - 1.25Gbps SFF Module
1 x ¥43,645.25 = ¥43,645.25Uncooled 1310nm SLED Diode - Coaxial Pigtailed
1 x ¥44,237.05 = ¥44,237.051610nm Laser and 1550nm PIN Diode Assembly for PON
1 x ¥31,069.50 = ¥31,069.5010Gb/s Pluggable SFP Transceiver - 850nm
1 x ¥10,208.55 = ¥10,208.55Optical Fiber Splicing Protector - Heat Shrinkable
1 x ¥5,903.20 = ¥5,903.20Optical Fiber Fusion Splicer
1 x ¥738,270.48 = ¥738,270.48Mini Broadband ASE Light Source - 1060nm
1 x ¥1,109,624.98 = ¥1,109,624.98VCSEL Transmitter - 1.25Gbps 850nm SC Connector
1 x ¥5,622.10 = ¥5,622.10Nx1 Multimode Power Combiner for Fiber Lasers
1 x ¥0.00 = ¥0.00Super Wide Spectrum Light Source - SLED
1 x ¥0.00 = ¥0.00Polarization Maintaining (PM) Optical Coupler - 2 micron meter
1 x ¥295,752.04 = ¥295,752.042.5Gbps APD Receiver Module - with Multi-Rate CDR
1 x ¥113,921.50 = ¥113,921.50- ¥3,019,496.69
- Shopping cart Checkout
- Home
- Opto-Electronics
Erbium Doped Fiber Amplifier (Mini Module) is a compact optical gain module offering cost-effective amplification of optical signals for a variety of applications. Electronic control circuits are integrated inside the module. This module has two operating modes: automatic gain control and automatic power control. Quality uncooled pump laser diode is used to ensure low power consumption.
Features:
- Compact package - only 90X70X15mm
- Low power consumption
- Automatic gain control and automatic power control
- High reliability
- GR-1312-CORE compliance
- Low cost
- Single +3.3V power supply
Applications:
- Single-channel or wide band optical communication systems
Specifications:
Single Channel Pre-Amplifier (with a bandfilter 0.7nm@3dB)
Pin Definition 3.3V 30 Pin (5V 20 Pin also available)
Outline
Ordering Information:
EDFA-S-a-d
a: Type of the EDFA; a=PA for pre-amplifier; a=PB for power booster.
d: Connector Type, d=FA for FC/APC, d=SU for SC/UPC, d=N for no connectors, etc.Example: EDFA-S-PB-SU
There are currently no product reviewsOur Offers
Contact Us
- Bitline System Pty. Ltd. 10 Fishburns Road, Galston, NSW 2159, Australia
- +61 2 98991412
- info@oemarket.com
oeMarket.com © 2024