19 products
Optical Fiber Fusion Splicer - Light Weight
1 x €2,760.58 = €2,760.5810Gb/s SFP Transceiver - DWDM, 40km Reach
1 x €727.19 = €727.19Direct Buried Optical Fiber Cable - 24 to 312 Fibers, G652.D
1 x €0.00 = €0.00Optical Power Meter - 650nm
1 x €377.40 = €377.40EPON OLT Optical Transceiver - 1.25Gbps SFF Module
1 x €271.55 = €271.55Uncooled 1310nm SLED Diode - Coaxial Pigtailed
1 x €275.23 = €275.231610nm Laser and 1550nm PIN Diode Assembly for PON
1 x €193.30 = €193.3010Gb/s Pluggable SFP Transceiver - 850nm
1 x €63.51 = €63.51Optical Fiber Splicing Protector - Heat Shrinkable
1 x €36.73 = €36.73Optical Fiber Fusion Splicer
1 x €4,593.29 = €4,593.29Mini Broadband ASE Light Source - 1060nm
1 x €6,903.75 = €6,903.75VCSEL Transmitter - 1.25Gbps 850nm SC Connector
1 x €34.98 = €34.98Nx1 Multimode Power Combiner for Fiber Lasers
1 x €0.00 = €0.00Super Wide Spectrum Light Source - SLED
1 x €0.00 = €0.00Polarization Maintaining (PM) Optical Coupler - 2 micron meter
1 x €1,840.08 = €1,840.082.5Gbps APD Receiver Module - with Multi-Rate CDR
1 x €708.78 = €708.78Optical Source DFB 1310nm
1 x €1,887.02 = €1,887.02Handheld Three Wavelength Source (1310/1550/1625)
1 x €1,086.19 = €1,086.19Visual Fiber Fault Finder - 10mW
1 x €72.72 = €72.72- €21,832.33
- Shopping cart Checkout
Call us: +61-2-98991412
- Home
- Opto-Electronics
This semiconductor optical amplifier (model: SOA-CL) is optimized to achieve moderate gain, low noise and high saturation power.
Note: this product has longer lead time than the standard lead time. Please inquire before you place the order.
Features:
- Center wavelength 1550nm
- High saturation output power (>14dBm)
- Low noise figure (<7.5dB)
- Low ASE ripple (<0.2dB)
- Low polarization dependence (1dB)
- InP buried heterostructure
- TEC cooled
Applications:
- Power booster for DWDM or CWDM
- Transmission amplifier
- OADM gain block
- Access PON amplifier
Specifications:
Recommended Operating Conditions
Specifications (measured at chip temperature of 20C, and 1535~1560nm)
Pin Definition
Dimensions
Ordering Information:
SOA-CL-a-c-d
a: Fiber type, a=1 for standard single mode fiber SMF-28 (recommended).
c: pigtail type, p=1 for 0.9mm tight buffer (recommended)
d: Connector Type, d=FA for FC/APC, d=SU for SC/UPC, d=N for no connectors, etc.Example: SOA-CL-1-1-FA
Semiconductor optical amplifier, inline DWDM optical amplification, high saturation power boosterOur Offers
Contact Us
- Bitline System Pty. Ltd. 10 Fishburns Road, Galston, NSW 2159, Australia
- +61 2 98991412
- info@oemarket.com
oeMarket.com © 2024