11 products
CWDM DFB Optical Laser Source
1 x US$2,190.00 = US$2,190.00DWDM DFB Optical Laser Source
1 x US$3,700.00 = US$3,700.001550nm DFB Laser Diode - High Power Butterfly Package
1 x US$2,250.00 = US$2,250.0010Gb/s Surface-Mount PIN/TIA Detector
2 x US$0.00 = US$0.00Direct Buried Optical Fiber Cable - 24 to 312 Fibers, G652.D
1 x US$0.00 = US$0.00EPON OLT Optical Transceiver - 1.25Gbps SFF Module
1 x US$295.00 = US$295.00Optical Fiber Fusion Splicer
1 x US$4,990.00 = US$4,990.00Visual Fiber Fault Finder - 10mW
1 x US$79.00 = US$79.00Optical Fiber Identifier
1 x US$890.00 = US$890.00Optical Switch - Handheld Model
1 x US$669.00 = US$669.00- US$15,063.00
- Shopping cart Checkout
Call us: +61-2-98991412
- Home
- Opto-Electronics
This semiconductor optical amplifier (model: SOA-CL) is optimized to achieve moderate gain, low noise and high saturation power.
Note: this product has longer lead time than the standard lead time. Please inquire before you place the order.
Features:
- Center wavelength 1550nm
- High saturation output power (>14dBm)
- Low noise figure (<7.5dB)
- Low ASE ripple (<0.2dB)
- Low polarization dependence (1dB)
- InP buried heterostructure
- TEC cooled
Applications:
- Power booster for DWDM or CWDM
- Transmission amplifier
- OADM gain block
- Access PON amplifier
Specifications:
Recommended Operating Conditions
Specifications (measured at chip temperature of 20C, and 1535~1560nm)
Pin Definition
Dimensions
Ordering Information:
SOA-CL-a-c-d
a: Fiber type, a=1 for standard single mode fiber SMF-28 (recommended).
c: pigtail type, p=1 for 0.9mm tight buffer (recommended)
d: Connector Type, d=FA for FC/APC, d=SU for SC/UPC, d=N for no connectors, etc.Example: SOA-CL-1-1-FA
Semiconductor optical amplifier, inline DWDM optical amplification, high saturation power boosterOur Offers
Contact Us
- Bitline System Pty. Ltd. 10 Fishburns Road, Galston, NSW 2159, Australia
- +61 2 98991412
- info@oemarket.com
oeMarket.com © 2024