19 products
10Gb/s SFP Transceiver - DWDM, 40km Reach
1 x ¥116,880.50 = ¥116,880.50CWDM DFB Optical Laser Source
1 x ¥324,010.49 = ¥324,010.49Nx1 Multimode Power Combiner for Fiber Lasers
2 x ¥0.00 = ¥0.00Optical Fiber Fusion Splicer - Light Weight
1 x ¥443,702.04 = ¥443,702.04Direct Buried Optical Fiber Cable - 24 to 312 Fibers, G652.D
1 x ¥0.00 = ¥0.001550nm DFB Laser Diode - High Power Butterfly Package
1 x ¥332,887.49 = ¥332,887.49Dispersion Compensation Fiber - C Band
2 x ¥0.00 = ¥0.0010Gb/s Surface-Mount PIN/TIA Detector
2 x ¥0.00 = ¥0.00Optical Fiber Splicing Protector - Heat Shrinkable
1 x ¥5,903.20 = ¥5,903.20Semiconductor Optical Amplifier (SOA) - High Power
1 x ¥0.00 = ¥0.00Polarization Maintaining (PM) Optical Coupler - 2 micron meter
1 x ¥295,752.04 = ¥295,752.04Optical Fiber Identifier
1 x ¥131,675.50 = ¥131,675.50Visual Fiber Fault Finder - 10mW
1 x ¥11,688.05 = ¥11,688.05Optical Fiber Fusion Splicer
1 x ¥738,270.48 = ¥738,270.48EPON OLT Optical Transceiver - 1.25Gbps SFF Module
1 x ¥43,645.25 = ¥43,645.25Mini Broadband ASE Light Source - 1060nm
1 x ¥1,109,624.98 = ¥1,109,624.98- ¥3,554,040.03
- Shopping cart Checkout
Call us: +61-2-98991412
- Home
- Opto-Electronics
This 1310nm Fabry-Perot laser source is a ready-to-use optical source for lab or testing applications. It uses a FP laser diode as the laser generation component for the single longitudinal mode output. Customer can specify the wavelength of the laser diode. Automatic power control and automatic temperature control circuits are implemented in the laser driver module. Highly stable output power is achieved. The laser source has internal low frequency square wave modulation. It also provides an external modulation connector so that the light output can be modulated by external signals. Upto 5.9dB attenuation of the output power can be adjusted from the front panel.
Features:
- Automatic power control (APC)
- Automatic temperature control (ATC)
- CW, internal modulation and external modulation modes
- Narrow band, multi-longitudinal mode laser poewr output
- Output power,attenuation range can be customized.
Applications:
- Optical fiber component manufacture & test
- Optical communication system test
- Optical cable system test
Typical Spectrum:
Specifications:
Ordering Information:
OS-FP-1310
See also:1310nm FP Pigtailed Laser Diode
1310nm FP laser source module APC ATC 0dBm output power internal and external modulation laser driverOur Offers
Contact Us
- Bitline System Pty. Ltd. 10 Fishburns Road, Galston, NSW 2159, Australia
- +61 2 98991412
- info@oemarket.com
oeMarket.com © 2024