- Fiber Optics
- Fiber Connect
This is a red light laser diode with output wavelength at 650nm or 635nm. It has a high performance multi-quantum-well (MQW) laser diode chip, with pigtail or receptacle optical interface. Output power from 1mW to 10mW is available. (All output power refers to power from the fiber pigtail of 9/125 micron fiber.)
- MQW 635 nm or 650 nm FP laser diode
- Low threshold current
- High output power (up to 10mW)
- Built-in InGaAsP monitor photodiode
- Wide operating temperature range (from -10 to +65 C degree)
- Optical source
Absolute maximum ratings:
Optical and Electrical Characteristics:
Please note above pin allocation is sample only. Special pin allocation can be requested. Refer to the test data sheet attached with each laser diode for its pin allocation.
a: Wavelength in nm; a=650 for 650nm; a=635 for 635nm.
b: Output Power; b=1 for 1mW; b=5 for 5mW; b=10 for 10mW, etc.
e: Package Option; e=P for coaxial fiber pigtailed package; e=R for receptacle package.
d: Connector Type, d=FA for FC/APC, d=SU for SC/UPC, d=N for no connectors, etc.
optical fiber 635 nm 650 nm Fabry Perot FP laser diodes module coaxial pigtailed or with receptacle, FC, SC, ST receptacles
-9%This is a red light laser diode with output wavelength at 650nm or 635nm. It has a high performance ...
This is a red light laser diode with output wavelength at 650nm or 635nm. It has a high performance ...
- Bitline System Pty. Ltd. 10 Fishburns Road, Galston, NSW 2159, Australia
- +61 2 98991412
oeMarket.com © 2017
- Fiber Optics